How To Clean Antique Bronze Hardware

Last year I transformed my historic butlers pantry with the help of some dark blue paint (see: Moody Midnight Pantry with Farrow & Ball Paint). The final step of this restoration project? Removing decades-worth of tarnish from the original brass hardware—all 36 pieces of it. I now consider myself an expert on how to polish brass.

Here's what I learned.

What you will need

for heavy tarnished brass like mine, remove the hardware before attempting to 9 — Above: For heavy tarnished brass like mine, remove the hardware before attempting to polish it. It's just too hard to do a thorough job if it is still attached to your cabinets.

Supplies you'll need:

White vinegar
Brass or metal polish such as Wenol Metal Polish; $9.66 at Amazon.
Gloves
Soft, clean cloths or rags
Mineral or linseed oil
Soft bristle brush (optional)
Protective surface covering (optional)
Varnish or nail polish remover (optional)

1. Test your metal.

you don&#8\2\17;t need a powerful magnet to test the authenticity of your b 10 — Above: You don't need a powerful magnet to test the authenticity of your brass. I borrowed a simple one from my fridge.

Before you begin, confirm that your piece is indeed solid brass and not plate or some other gold-toned metal. To test, simply hold a magnet up to the surface. If it doesn't stick, you have solid brass. If it does, you most likely have plate. Clean this only with soap and water.

2. Strip any lacquer.

the results of old varnish or stain, the brown discolorations on these two piec 11 — Above: The results of old varnish or stain, the brown discolorations on these two pieces needed to be cleaned with varnish remover.

Many modern brass surfaces are protected with a lacquer finish. Even so, they can become tarnished. You will not be able to effectively polish them until the varnish is removed.

First, examine your piece; lacquered brass is more yellow, smooth, and shiny than unfinished brass. To remove the lacquer, submerge your brass piece in very hot water, which will cause the brass and the lacquer to expand. You may need to go so far as to boil your brass object in a non-aluminum pot. Carefully, remove your piece from the water and let it cool. As it does so, the metal will contract from the finish, and you should be able to peel the lacquer away. You can also eliminate lacquer with varnish remover and a soft, clean cloth. Nail polish remover also works. For really old, stubborn lacquers, consider soaking your piece in the chemical remover for several hours. Never use an abrasive cleanser, wire brush, or steel wool, as these will scratch the metal.

3. Pre-clean.

Using hot, soapy water and a soft cloth or brush, clean away any dirt, food, or other deposits. For wax, try carefully pouring boiling water over the spill until it melts away. Dry thoroughly before you polish.

4. Polish the brass.

acids such as vinegar or lemon, even ketchup, can be used to clean brass. 12 — Above: Acids such as vinegar or lemon, even ketchup, can be used to clean brass.

A. Eco-Friendly Solution

I like to start with straight white vinegar, which is usually all I need to touch up a piece of mildly oxidized brass. To use, simply dip the end of a soft, clean cloth into your vinegar and rub the brass until it shines. You can also add 1 teaspoon salt to 1/4 cup of vinegar to boost the polishing effects. But make sure the salt is not too coarse, as it can scratch the brass. Some people also use lemon juice and salt in similar proportions. Others add flour to their acid/salt combos to make a paste which they leave on the brass for 10 minutes, then buff away.